NPIV

This article may be too technical for most readers to understand. Please help improve it to make it understandable to non-experts, without removing the technical details. (June 2014) (Learn how and when to remove this message)

NPIV or N_Port ID Virtualization is a Fibre Channel feature whereby multiple Fibre Channel node port (N_Port) IDs can share a single physical N_Port. This allows multiple Fibre Channel initiators to occupy a single physical port, easing hardware requirements in Storage Area Network (SAN) design, especially where virtual SANs are called for. This allows each virtual server to see its own storage and no other virtual server's storage.^[1] NPIV is defined by the Technical Committee T11 in the Fibre Channel - Link Services (FC-LS) specification.

Normally N_Port initialization proceeds like this:

• N_Port sends FLOGI to address 0xFFFFFE to obtain a valid address
• N_Port sends PLOGI to address 0xFFFFFC to register this address with the name server
• N_Port sends SCR to address 0xFFFFFD to register for state change notifications

However, with NPIV it may continue like this:

• N_Port sends FDISC to address 0xFFFFFE to obtain an additional address
• N_Port sends PLOGI to address 0xFFFFFC to register this additional address with the name server
• N_Port sends SCR to address 0xFFFFFD to register for state change notifications.
• ... (repeat FDISC/PLOGI/SCR for next address)

FDISC is an abbreviation for Fabric Discovery, or "Discover Fabric Service Parameters", which is a misleading name in this context. It works just like FLOGI.

N_Port is used to connect equipment ports to the fibre channel fabric (optical network) Source: https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA4-4545ENW.pdf

• Fibre Channel - Link Services
• NPIV Functionality Protocol
• T11 latest draft standards page