Jason-3 makes precise measurements related to global sea-surface height. Because sea surface height is measured via altimetry, mesoscale ocean features are better simulated since the Jason-3 radar altimeter can measure global sea-level variations with very high accuracy.[5][6] The scientific goal is to produce global sea-surface height measurements every 10 days to an accuracy of less than 4 cm.[7] In order to calibrate the radar altimeter, a microwave radiometer measures signal delay caused by atmospheric vapors, ultimately correcting the altimeter's accuracy to 3.3 cm.[5][8] This data is important to collect and analyze because it is a critical factor in understanding the changes in Earth's climate brought on by global warming as well as ocean circulation.[6] NOAA's National Weather Service uses Jason-3's data to more accurately forecast tropical cyclones.[9]
Scientific applications
The primary users of Jason-3 data are people who are dependent on marine and weather forecasts for public safety, commerce and environmental purposes. Other users include scientists and people who are concerned with global warming and its relation to the ocean. National Oceanic and Atmospheric Administration (NOAA) and European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) are using the data primarily for monitoring wind and waves on the high seas, hurricane intensity, ocean surface currents, El Niño and La Niña forecasts, water levels of lakes and rivers. Jason-3 also reports on environmental issues such as algae blooms and oil spills.[10]NASA and CNES are more interested in the research aspect, in terms of understanding and planning for climate change. Jason-3 can measure climate change via sea surface height because sea surface rise, averaged over annual time scales, is accelerated by warming global temperatures.[5] Ultimately, the benefits of Jason-3 data will transfer to people and to the economy.
Orbit
Animation of Jason-3's orbit from 20 May 2018 to 14 November 2018. Earth is not shown.
Jason-3 flies at the same 9.9-day repeat track orbit and this means the satellite will make observations over the same ocean point every 9.9 days. The orbital parameters are: 66.05º inclination, 1,380 km apogee, 1,328 km perigee, 112 minutes per revolution around Earth. It was set to fly 1 minute behind the now decommissioned Jason-2. The 1-minute time delay was applied in order to not miss any data collection between missions.
Orbit determination instruments
In order to detect sea level change, we need to know the orbit height of the satellites as they revolve around Earth, to within 1 cm (0.4 inches). Combining instruments from three different techniques—GPS, DORIS, LRA. The GPS receiver on Jason-3 uses data from the constellation of GPS satellites in orbit to constantly determine its position in orbit.[4] Similarly, DORIS is another system to help determine orbit positioning. Designed by CNES in France, DORIS uses the Doppler effect to found its system, which describes the differences in frequencies of waves between source and object.[11][12] Thirdly, LRA (Laser Retroreflector Array), which is an instance of satellite laser ranging (SLR), uses corner reflectors on board the satellite to track the time it takes for lasers shot from Earth to reach the satellite and be reflected back, which can then be analyzed to understand the orbital positioning of Jason-3 from ground tracking stations. These three techniques (GPS, DORIS, LRA) all aid in determining orbit height and positioning.[13]
Launch
Falcon 9 rolling out on 15 January 2015
Appearing on the SpaceX manifest as early as July 2013,[14] Jason-3 was originally scheduled for launch on 22 July 2015. However, this date was pushed back to 19 August 2015 following the discovery of contamination in one of the satellite's thrusters, requiring the thruster to be replaced and further inspected.[15][16] The launch was further delayed by several months due to the loss of a Falcon 9 rocket with the CRS-7 mission on 28 June 2015.[17]
After SpaceX conducted their return-to-flight mission in December 2015 with the upgraded Falcon 9 Full Thrust, Jason-3 was assigned to the final previous-generation Falcon 9 v1.1 rocket, although some parts of the rocket body had been reworked following the findings of the failure investigation.[18][19]
A 7-second static fire test of the rocket was completed on 11 January 2016.[20] The Launch Readiness Review was signed off by all parties on 15 January 2016, and the launch proceeded successfully on 17 January 2016, at 18:42 UTC. The Jason-3 payload was deployed into its target orbit at 830 mi (1,340 km) altitude after an orbital insertion burn about 56 minutes into the flight.[21] It was the 21st Falcon 9 flight overall[18] and the second into a high-inclination orbit from Vandenberg Air Force BaseSpace Launch Complex 4E in California.[15]
Following paperwork filed with US regulatory authorities in 2015,[22] SpaceX confirmed in January 2016 that they would attempt a controlled-descent flight test and vertical landing of the rocket's first stage on their west-coast floating platformJust Read the Instructions,[23] located about 200 mi (320 km) out in the Pacific Ocean.
Approximately nine minutes into the flight, the live video feed from the drone ship went down due to the losing its lock on the uplink satellite. Elon Musk later reported that the first stage did touch down smoothly on the ship, but a lockout on one of the four landing legs failed to latch, so that the booster fell over and was destroyed.[27][28][29]
Debris from the fire, including several rocket engines attached to the octaweb assembly, arrived back to shore on board the floating landing platform on 18 January 2016.[30]
^"Jason-3 Satellite". nesdis.noaa.gov. 20 September 2019. Retrieved 26 February 2020. This article incorporates text from this source, which is in the public domain.
^"Jason-3 Satellite". nesdis.noaa.gov. 20 September 2019. Retrieved 26 February 2020. This article incorporates text from this source, which is in the public domain.
^"CRS-7 Investigation Update". SpaceX. 20 July 2015. Archived from the original on 26 March 2017. Retrieved 21 July 2015. Our investigation is ongoing until we exonerate all other aspects of the vehicle, but at this time, we expect to return to flight this fall and fly all the customers we intended to fly in 2015 by end of year.
^Curie, Mike (11 January 2016). "SpaceX Falcon 9 Static Fire Complete for Jason-3". NASA. Retrieved 12 January 2016. At Space Launch Complex 4 on Vandenberg Air Force Base in California, the static test fire of the SpaceX Falcon 9 rocket for the upcoming Jason-3 launch was completed Monday at 5:35 p.m. PST, 8:35 p.m. EST. The first stage engines fired for the planned full duration of 7 seconds.
^Jason-3 Hosted Webcast. youtube.com. SpaceX. 17 January 2016. Event occurs at 1:37:08 (55:58 after lift-off). Retrieved 17 January 2016.
^"Press Kit: ORBCOMM-2 Mission"(PDF). SpaceX. 21 December 2015. Archived from the original(PDF) on 23 December 2015. Retrieved 21 December 2015. This mission also marks SpaceX's return-to-flight as well as its first attempt to land a first stage on land. The landing of the first stage is a secondary test objective.
Launches are separated by dots ( • ), payloads by commas ( , ), multiple names for the same satellite by slashes ( / ). Crewed flights are underlined. Launch failures are marked with the † sign. Payloads deployed from other spacecraft are (enclosed in parentheses).
_(2).jpg)
.jpg)
.jpg)
