Interdigital transducer

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Interdigital transducer" – news · newspapers · books · scholar · JSTOR (December 2006) (Learn how and when to remove this message)

An interdigital transducer (IDT) is a device that consists of two interlocking comb-shaped arrays of metallic electrodes (in the fashion of a zipper). These metallic electrodes are deposited on the surface of a piezoelectric substrate, such as quartz or lithium niobate, to form a periodic structure.^[1]

IDTs primary function is to convert electric signals to surface acoustic waves (SAW) by generating periodically distributed mechanical forces via piezoelectric effect (an input transducer).

The same principle is applied to the conversion of SAW back to electric signals (an output transducer). These processes of generation and reception of SAW can be used in different types of SAW signal processing devices, such as band pass filters, delay lines, resonators, sensors, etc.

IDT was first proposed by Richard M. White and Voltmer in 1965.

• White, R.M.; Voltmer, F.W. (1965). "Direct piezoelectric coupling to surface elastic waves". Appl. Phys. Lett. 7 (12): 314–6. Bibcode:1965ApPhL...7..314W. doi:10.1063/1.1754276.
• Mamishev, A.V.; Sundara-Rajan, K.; Yang, F.; Du, Y.; Zahn, M. (2004). "Interdigital sensors and transducers" (PDF). Proceedings of the IEEE. 92 (5): 808–845. CiteSeerX 10.1.1.473.5989. doi:10.1109/JPROC.2004.826603. S2CID 159431.
• Igreja, R.; Dias, C.J. (2004). "Analytical evaluation of the interdigital electrodes capacitance for a multi-layered structure". Sensors and Actuators A: Physical. 112 (2–3): 291–301. doi:10.1016/j.sna.2004.01.040.

This electronics-related article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e