Provider router
In Multiprotocol Label Switching (MPLS), a P router or provider router is a label switch router (LSR) that functions as a transit router of the core network.[1] The P router is typically connected to one or more PE routers.
Here's one scenario: A customer who has facilities in LA and Atlanta wants to connect these sites over an MPLS VPN provided by AT&T. To do this, the customer would purchase a link from the on-site CE router to the PE router in AT&T's central office in LA and would also do the same thing in Atlanta. The PE routers would connect over AT&T's backbone routers (P routers) to enable the two CE routers in LA and Atlanta to communicate over the MPLS network.
See also
References
- ^ "BGP/MPLS IP Virtual Private Networks (VPNs)". IETF Tools. IETF. Retrieved 2019-11-13.
Further reading
- "A Network Administrator's View of Multiservice Networks". Cisco Press. 5 December 2005.
Content Disclaimer
Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.
- The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
- There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
- It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
- Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
- Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.