LC80

LC80
ManufacturerKombinat Mikroelektronik Erfurt
TypeMicroprocessor development board
ReleasedMid-1984
Introductory price
720.00 M (without power supply)
Discontinuedc. 1986/87
LC 80.1
CPUU880 @ 0.9 MHz
Memory1 KB
StorageExternal cassette tape
Display6-digit seven-segment display
SoundBuzzer
SuccessorRobotron Z1013 (1986)
The learning computer with power supply
LC80 outside

The educational computer LC80 was a single-board computer manufactured in the German Democratic Republic (GDR) and intended for teaching purposes. It was the first computer that retail customers could buy in the GDR.

History and development

The development of the LC 80 started in 1983.[1] At the Leipzig Trade Fair in the spring of 1984 it was presented to the public.[2] Early in 1985 the LC80 was on the market, making it the first computer available to retail customers in the GDR.[1] The computers Z 9001 and HC 900 that had been shown at the same spring fair, could not be manufactured in sufficient quantity and were thus available only to educational institutions.

The learning computer LC 80 was developed in a very short period of time by a collective of the Consulting and Information Centre for Microelectronics of the Erfurt district in cooperation with the consumer goods department of VEB Mikroelektronik "Karl Marx" Erfurt. It was conceived in such a way that a device, which is as inexpensive as possible, allows a practical use of microprocessor technology by a broad circle of users. Prospective users are high school and vocational school students, students of electrical engineering/electronics, industrial control technicians and other interested parties. The LC 80 offers an almost unlimited field of application, ranging from hobby, school, training and continuing education to use in small industrial control systems.

— Dr. Werner Kämpf, developer, [3]

The production probably ended around 1986/87.[1]

Technical details

The LC80 was programmed by entering hexadecimal machine codes via a built-in 25-key calculator keyboard (16 hexadecimal keys, 7 function keys, NMI, Reset). Programs could be saved and loaded via cassette tape or EPROM. Beside the CPU the board contained two PIO and one CTC integrated circuits as well as 1 KB of RAM and 2 KB of ROM.

Interfaces:

Export version

Based on a request from the United Kingdom, an export variant was developed. This version differed from the conventional LC80 in the following details:

  • wooden cabinet
  • 12 KB ROM
  • 4 KB RAM
  • keyboard template for chess program SC-80 (similar to the East German chess computer SC2)

As the order from abroad did not come through in the end, only samples were manufactured of this version.[4]

Software and applications

Except for the operating system, no software was included. The manufacturer published a series of three booklets that contained software as hexadecimal machine code listings.[5] Software and applications were published in journals such as Funkamateur (Morse code trainer[6]) and Radio Fernsehen Elektronik (EPROM programmer,[7] robot model control[8]). Given the limited availability of computers in East Germany, the LC80 was even used to control scales underground in a potash mine.[9]

See also

Other microprocessor development systems with a hexadecimal display and hexadecimal program entry: MEK6800D2 (1976), KIM-1 (1976), TK-80 (1976), MK14 (1977), Acorn System 1 (1979), Micro-Professor MPF-I (1981), PMI-80 (1982), TEC-1 (1983)

References

  1. ^ a b c Volker Pohlers (2018-10-26). "Erinnerungen" [Memories] (in German). Retrieved 2019-11-02.
  2. ^ V. Löschner; B. Kasper (1984). "Leipziger Frühjahrsmesse 1984 - Computertechnik" [Leipzig Spring Fair 1984 - Computers]. Radio Fernsehen Elektronik (in German). 33 (7). Berlin: VEB Verlag Technik: 412, 430. ISSN 0033-7900.
  3. ^ Werner Kämpf (1984). "Lerncomputer LC 80". Radio Fernsehen Elektronik (in German). 33 (10). Berlin: VEB Verlag Technik: 669–672. ISSN 0033-7900.
  4. ^ Volker Pohlers (2017-07-28). "LC 80 Export". Retrieved 2019-11-16.
  5. ^ Gunther Zielosko. Hinweise zur Anwendung des Lerncomputers LC 80 [Notes on using the LC 80 learning computer] (in German). Erfurt: VEB Mikroelektronik „Karl Marx“.
  6. ^ N. Denkes (1986). "Lerncomputer "LC 80" als Morseübungsgerät" [The learning computer LC 80 as a Morse code trainer]. Funkamateur (in German). Vol. 35, no. 1. Berlin: Militärverlag der DDR. pp. 29–30. ISSN 0016-2833.
  7. ^ Christiane Philipp (1987). "Programmieren des EPROM U 2716 C mit dem LC 80" [Programming the EPROM U 2716 C using the LC 80]. Radio Fernsehen Elektronik (in German). 36 (1). Berlin: VEB Verlag Technik: 52. ISSN 0033-7900.
  8. ^ Achim Liers; Matthias Michel (1987). "LC 80 als Steuerrechner für ein Roboterfunktionsmodell" [Controlling a robot model using the LC 80]. Radio Fernsehen Elektronik (in German). 36 (8). Berlin: VEB Verlag Technik: 519–520. ISSN 0033-7900.
  9. ^ N. Denkes (2018-10-26). "Erinnerungen" [Memories] (in German). Retrieved 2019-11-02.

Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.