Calcium fluoride is the inorganic compound of the elements calcium and fluorine with the formula CaF2. It is a white solid that is practically insoluble in water. It occurs as the mineral fluorite (also called fluorspar), which is often deeply coloured owing to impurities.
The compound crystallizes in a cubic motif called the fluorite structure.
Ca2+ centres are eight-coordinate, being centered in a cube of eight F− centres. Each F− centre is coordinated to four Ca2+ centres in the shape of a tetrahedron.[5] Although perfectly packed crystalline samples are colorless, the mineral is often deeply colored due to the presence of F-centers.
The same crystal structure is found in numerous ionic compounds with formula AB2, such as CeO2, cubic ZrO2, UO2, ThO2, and PuO2. In the corresponding anti-structure, called the antifluorite structure, anions and cations are swapped, such as Be2C.
Gas phase
The gas phase is noteworthy for failing the predictions of VSEPR theory; the CaF2 molecule is not linear like MgF2, but bent with a bond angle of approximately 145°; the strontium and barium dihalides also have a bent geometry.[6] It has been proposed that this is due to the fluoride ligands interacting with the electron core[7][8] or the d-subshell[9] of the calcium atom.
Preparation
The mineral fluorite is abundant, widespread, and mainly of interest as a precursor to HF. Thus, little motivation exists for the industrial production of CaF2. High purity CaF2 is produced by treating calcium carbonate with hydrofluoric acid:[10]
Naturally occurring CaF2 is the principal source of hydrogen fluoride, a commodity chemical used to produce a wide range of materials.
Calcium fluoride in the fluorite state is of significant commercial importance as a fluoride source.[11] Hydrogen fluoride is liberated from the mineral by the action of concentrated sulfuric acid:[12]
Calcium fluoride is used to manufacture optical components such as windows and lenses, used in thermal imaging systems, spectroscopy, telescopes, and excimer lasers (used for photolithography in the form of a fused lens). It is transparent over a broad range from ultraviolet (UV) to infrared (IR) frequencies. Its low refractive index reduces the need for anti-reflection coatings. Its insolubility in water is convenient as well.[citation needed] It also allows much smaller wavelengths to pass through.[citation needed]
CaF2 is classified as "not dangerous", although reacting it with sulfuric acid produces hydrofluoric acid, which is highly corrosive and toxic. With regards to inhalation, the NIOSH-recommended concentration of fluorine-containing dusts is 2.5 mg/m3 in air.[10]
^Pradyot Patnaik. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN0-07-049439-8
^X-ray Diffraction Investigations of CaF2 at High Pressure, L. Gerward, J. S. Olsen, S. Steenstrup, M. Malinowski, S. Åsbrink and A. Waskowska, Journal of Applied Crystallography (1992), 25, 578-581 doi:10.1107/S0021889892004096
^Bytheway, I.; Gillespie, R. J.; Tang, T. H.; Bader, R.F (1995). "Core Distortions and Geometries of the Difluorides and Dihydrides of Ca, Sr, and Ba". Inorg. Chem.34 (9): 2407–2414. doi:10.1021/ic00113a023.