Synchronization Channel
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
Synchronization Channel is a downlink only control channel used in GSM cellular telephone systems. It is part of the Um air interface specification. The purpose of the SCH is to allow the mobile station (handset) to quickly identify a nearby cell (a BTS) and synchronize to that BTS's TDMA structures. Each radio burst on the SCH contains:
- the current frame clock of the serving BTS,
- the Base station identity code (or BSIC), a truncated form of cell identity, and
- an extended Training Sequence that is easily detected with a matched filter.
When mobile turns on after getting FCCH it waits for getting SCCH which is to synchronise mobile's oscillator frequency with the frequency of the Base channel.
The burst structure of the SCH is defined in GSM specification 05.03 section 4.7.[1] The encoding of the frame clock is defined in GSM specification 04.08 section 9.1.30.[2] The TDMA multiplexing pattern of the SCH is defined in GSM specification 05.02 section 7 table 3.[3]
The GSM Synchronization Burst Contains a Training Sequence of 64 bits that is used to facilitate synchronization.
- Sync bits are known by both the BTS and the mobile.
- Detecting where the synchronization burst occurs in time allows the MS to synchronize with the BTS baud clock and frame clock.
- Tracking the drift from SCH burst to SCH burst can be used by the mobile station to fine-tune receiver clock
References
- ^ "4.7 Synchronization channel (SCH)". Digital cellular telecommunications system (Phase 2+) (PDF). European Telecommunications Standards Institute (technical specification). European Telecommunications Standards Institute. 2001. GSM 05.03. Retrieved 2026-03-10.
- ^ "9.1.30 Synchronization channel information". Digital cellular telecommunications system (Phase 2+); (PDF). European Telecommunications Standards Institute (technical specification). European Telecommunications Standards Institute. 2001. GSM 04.08. Retrieved 2026-03-10.
- ^ "7 Table 3 Mapping of logical channels onto physical channels". Digital cellular telecommunications system (Phase 2+); (PDF). European Telecommunications Standards Institute (technical specification). European Telecommunications Standards Institute. 2001. GSM 05.02. Retrieved 2026-03-10.
 | This article related to telecommunications is a stub. You can help Wikipedia by adding missing information. |
Content Disclaimer
Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.
- The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
- There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
- It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
- Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
- Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.