Knight's Armament Company PDW

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article needs to be updated. Please help update this article to reflect recent events or newly available information. (May 2011) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Knight's Armament Company PDW" – news · newspapers · books · scholar · JSTOR (May 2011) (Learn how and when to remove this message) (Learn how and when to remove this message)

Knights Armament Company PDW
Type	Personal defense weapon, Rifle, Carbine
Place of origin	United States
Production history
Designer	Knight's Armament Company
Designed	2006
Manufacturer	Knight's Armament Company
Produced	2006–Present
Specifications
Mass	4.5 lb (2.0 kg)[1]
Length	28 in (710 mm) overall 19.5 in (500 mm) with stock folded
Barrel length	254 mm (10.0 in) 203 mm (8.0 in) barrel available
Cartridge	6×35mm, .300 Whisper/.300 Blackout
Action	Gas-operated, rotating bolt
Muzzle velocity	2,425 ft/s (739 m/s) with 10-inch (250 mm) barrel
Effective firing range	250-300 m
Feed system	30-round detachable box magazine
Sights	Iron sights

The Knight's Armament Company 6×35mm PDW is an experimental personal defense weapon designed by Knight's Armament Company (KAC), firing a 6mm cartridge optimized for short barrel weapons. A variant chambered in .300 AAC Blackout is also available.

The KAC's lower receiver, holding the magazine and trigger assembly, is essentially a shortened M16 rifle lower receiver, which makes the basic operating controls familiar to many potential users.^{[citation needed]} However, the cartridge, upper receiver, and operating mechanism are all new designs by KAC.^[2]

The KAC PDW uses a completely side-folding stock, unlike the M16 and M4 designs which have their main operating spring in a tube in the stock, and therefore can only partially telescope, and not fold sideways at all, unless specialized hardware is installed.

The KAC PDW has two gas pistons tapping hot gas from the barrel to operate its mechanism, located on the top left and right sides of the bolt carrier. The single mainspring is located on top, between the two gas pistons.^[3]

The KAC PDW fires a 6×35 mm cartridge, which is over a centimeter shorter than the 5.56×45mm NATO round. The 6mm bullet is slightly wider, and the standard 6×35mm bullet slightly heavier, than the standard 5.56mm bullet (65 grains (4.2 g) versus 62 grains (4.0 g)).^[1]

Fired from a 10-inch (250 mm) barrel, KAC claims that the 6×35mm cartridge reaches a muzzle velocity of 2,450 ft/s (750 m/s), slightly faster than the muzzle velocity of a 5.56 mm cartridge fired from a similarly short barrel. The larger diameter, shorter 6 mm cartridge is optimized for these shorter barrel lengths, and would perform less efficiently from rifle-length barrels. The round's muzzle energy is 831 ft⋅lbf (1,127 J) versus 792 ft⋅lbf (1,074 J) for a 5.56 mm bullet, again from the same 10" standard barrel.^{[citation needed]}

The weapon was formally introduced at the 2006 NDIA Small Arms Symposium in Albuquerque, New Mexico. Some writers were shown samples at the earlier 2006 SHOT Show.^[3]

• Official website